Fuel and Oil Filter Systems Heart Inverters Sliding Parts Rack Storage Tray and Generator Control Panel Work Bench Drill Press and Hurricane System Shore Power Isolation Transformer Electrical Panel Escape Door and Fire Extinquisher Water Maker Control Panel
                                    Engine Room Entrance to the engine room is gained through the galley. There is a 2ft X 4ft work bench with an aluminum top for easy cleanup. The work bench is equipped with a 4” vice and an 8” four-speed drill press. It has two drawers on sliders below, for tool storage. There is a rack of 10 plastic parts tray/boxes just inside the door. They have been the envy of every boater that has seen them! Above this rack is a Hurricane Hydronic Diesel fired hot water heating system. Above the work bench are two 8” opening port holes. The water maker control panel is at the back of the work bench and there are 4 water system filters (one with a UV Light). These are easily accessed on the left side. The fresh water pump and valve system are mounted in the corner. On the starboard side as you enter the engine room, there is the main electrical panel and breakers. Aft of this panel is a door/escape hatch giving access to the pilot house. Below the floor as you enter is the water-maker, accessed though two lifting hatches. Directly aft as you enter, below the work bench is the Northern Lights 6KW generator cupboard. Above which is the generator control panel and the shore-power isolation transformer. To the left is another rack of 4 plastic parts tray/boxes then a cupboard for spare belts. On the starboard wall are two Heart Freedom 2500 watt inverters, next to them forward is a Dry-Zones dehumidifying system. In the center is the main engine box. Above which on the forward bulkhead there is a Dual Racor 1000FGX filter system, a Purifiner TF 24P oil management system, a Monarch BE-S33 waste discharge pump and a Walbro diesel pulse pump, for priming the main filters and fuel system.